Ecolab EcoAdd

7.9.14.1.2 Metering controller
Fig. 70: Configuration: Metering controller
Factory setting: No metering controller
[Metering controller] - select:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Use the scrollbar to scroll to the [Oval gear meter] menu option.
4. [Oval gear meter] - select
ð
Screen switches to the [Oval gear meter].
5. [Metering controller] - select.
ð
Screen change for setting: [Metering controller]
6. If required, select the ‘W
ith metering controller’ selection box.
ð
The ‘with metering controller’ selection box is
marked.
7.
Press the button.
ð
The setting is saved, and the screen switches back to the configuration overview
.
8.
Pressing the button returns to the [Main menu].
9.
Pressing the button returns to the [Operating display].
Control / software
112Rev. 2-05.2018