Ecolab EcoAdd User Manual

4.1 Equipment features - ‘EcoAdd’
n button: On/Off button
n Viscosity: 4 viscosity modes (standard , medium , low , variable )
n Operating modes: 5 operating modes (Manual, Pulse, Power, Timer, Batch)
n Display: Touch display
n
Setting range: 1:100
n Data exchange: USB port
n Inputs:
–
Electrical connection
– Enable signal
– Pulse input
– Power
– Charge
– Level (fill level)
– Flow
– Diaphragm breakage monitor
– USB input
n
Outputs:
–
Stroke signal
– Alarm
– CAN bus system
– USB output
4.1.1 Additional electronic functions
n Metering monitoring (in combination with oval gear meter ‘OGM
PLUS
’)
n Metering control (in combination with oval gear meter ‘OGM
PLUS
’)
n Bluetooth module for communication between the pump and smartphone
4.2 Evaluation, monitoring & control with smartphone
If the pump is expanded with an additional Bluetooth PCB and the relevant version of the
‘EcoApp’
corresponding to the smartphone operating system has been installed on the
smartphone, data exchange between the pump and ‘EcoApp’ is possible:
Ä Chapter 1.2 ‘Evaluation, monitoring & control with smartphones’ on page 8.
Functional description
35 Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English