13.3.2 Pump key group II - "Pump head" [01110S|D|F|C|0|0|S]
No. 4: ‘Capacity in L/back-pressure/driver unit’
01110S
Key: Capacity in L: [l/h]
Pressure [MPa
(bar)]
Size of driver unit
00510X 0.05 - 5 1 (10) XS
01110S 0.11 - 11 1 (10) S
03003S 0.3 - 30 0.3 (3) S
05010M 0.50 - 50 1 (10) M
12003M 1.2 - 120 0.3 (3) M
No. 5: ‘Material: Pump head/valves’
D
Key: Description:
P PP (polypropylene)
D PVDF (polyvinylidene difluoride)
S Stainless steel (V4A)
No. 6: ‘Material: Seals’
F
Key: Description:
F FKM (fluorocarbon rubber)
E EPDM (ethylene propylene diene monomer rubber)
T PTFE coated (polytetrafluoroethylene)
K FFPM (Kalrez) (perfluorinated rubber)
No. 7: ‘Material: V
alve balls’
C
Key: Description:
C Ceramic
T PTFE (polytetrafluoroethylene)
S Stainless steel V4A
No. 8: ‘V
alve spring’
0
Key: Description:
0 No spring
1 SAV: 0.1 bar, DRV: 0.1 bar
2 SAV: No spring, DRV: 0.3 bar
3 SAV: No spring, DRV: 0.5 bar
No. 9: ‘Hydraulic connection’
0
Key: Description:
0 Without hose connection parts
No. 10: ‘Pump head version’
S
Key: Description:
S Standard version
Technical data
186Rev. 2-05.2018
To Next Page
Loading...
