Ecolab EcoAdd

7.9.3.2 Reset the language to German or to another language
Fig. 47: Language overview
[Language] - setting:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Menu item [Language] - select
ð
The language selection page [Language] is displayed
4. [Language] - select.
ð
The selection mark in the options field is in the circle in front of the selected
language.
5.
Pressing the button saves the setting.
ð
The screen switches to the overview: [Configuration menu] in German.
6.
Pressing the button returns to the [Main menu].
7.
Pressing the button returns to the [Operating display].
Control / software
87 Rev. 2-05.2018