Ecolab EcoAdd User Manual

7.9.14.1.3 Max. metering phase
Fig. 71: Configuration: Max. metering phase
[Max. metering phase] - select:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Use the scrollbar to scroll to the [Oval gear meter] menu option.
4. [Oval gear meter] - select
ð
Screen switches to the [Oval gear meter].
5. [Max. metering phase] - select.
ð
Screen change for setting: [Max. metering phase]
6. Enter the seconds before the decimal point with the scrollbar
.
7. Select the seconds after the decimal point.
8. Enter the seconds with the scrollbar
.
9.
Press the button.
ð
The setting is saved, and the screen switches back to the [Oval gear meter]
.
10.
Press the button.
ð
The setting is saved, and the screen switches back to the configuration overview
.
11.
Pressing the button returns to the [Main menu].
12.
Pressing the button returns to the [Operating display].
Control / software
113 Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English