5 Description of the pump
Fig. 5: Structure ‘EcoAdd’
1 Rotary operating device
2 ON/OFF button
3 USB port
4 Input display (touchscreen)
5 Cable bushings and connections behind the display
cover
6 Type plate
7 Mains cable bushing / Mains connection
8 Suction connection / suction valve
9 Pump head
10 Pressure connection / pressure valve
5.1 Identification of the pump - Type plates
The pump is equipped with a type plate (
Fig. 5, pos. 6) that provides the pump-specific
data for identification.
The type plate is located on the front of the pump, underneath the display, and is
explained in
Ä
Chapter 13.2 ‘Equipment marking / Type plate’ on page 184 .
Description of the pump
36Rev. 2-05.2018
To Next Page
Loading...
Need help?
General
