Ecolab EcoAdd

8.2 Connection and set-up examples
8.2.1
Operating mode [Manual] (with ‘metering enable’)
Terminal assignment:
Fig. 80: Terminal assignment: Floating contact
Step one: Select operating mode in the software:
Fig. 81: Select the operating mode
1.
[Main menu] Press the button.
ð
The ‘Main menu’ screen is displayed.
2. [Operating mode] - select.
ð
Select ‘Operating mode’ is displayed.
3. ‘Select Manual’:
4.
Pressing the button saves and returns to the [Main menu].
5.
Pressing the button returns to the [Operating display].
Commissioning
125 Rev. 2-05.2018