Ecolab EcoAdd User Manual

7.9.2 Selecting the date/time
Fig. 45: Configuration: Date/time
[Selecting the date/time] - setting:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. [Selecting the date/time] - select.
ð
Screen change for setting: ‘Date’.
4. ‘Set the year
’ using the scrollbar (range: 2000 -2099).
5. ‘Select the month’.
6. Set the month with the scrollbar (range: 1 -12).
7. ‘Select tag’.
8. Set the day with the scrollbar (range: 1 -31).
9.
[ Press the Next button] .
ð
Screen change for setting: ‘T
ime’.
10. ‘Set hours’
with the scrollbar (range: 0 -23).
11. ‘Select minutes’.
12. ‘Set the minutes’
with the scrollbar (range: 0 -59).
13.
[ Press the Next button] .
14. Select the date format:
15.
[ Press the Next button] .
ð
Screen change for setting: ‘Summer time’.
16. If required, ‘select automatic summer/winter time changeover
’
ð
After selecting this, a check mark
is set in the selection field.
17.
Pressing the button saves the setting.
ð
The screen switches to the overview: [Configuration menu].
18.
Pressing the button returns to the [Main menu].
19.
Pressing the button returns to the [Operating display].
Control / software
85 Rev. 2-05.2018

Ecolab EcoAdd Specifications

General

Brand	Ecolab
Model	EcoAdd
Category	Water Pump
Language	English