7.9.10 Dosing chemical
This setting provides the option to define a metering chemical being used.
Overview
Fig. 57: Configuration: Metering chemical
Factory setting: No details
The following selection options are available:
n
Ä
Chapter 7.9.10.1 ‘No entry’ on page 98
n
Ä
Chapter 7.9.10.2 ‘Manual input (manual)’ on page 99
n
Ä
Chapter 7.9.10.3 ‘Chemical selection from an integrated database’ on page 100
7.9.10.1 No entry
Fig. 58: Configuration: Dosing chemical - No entry
[ Set no entry:]
1.
Call up the [Main menu]:
Ä
Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration.] selection:
Ä
Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Scroll up to [Dosing chemical]
using the scrollbar along the right edge of the screen.
4. Select [Dosing chemical] in the configuration menu.
ð
Screen switches to the dosing chemical setting.
5. Option: Select [no entry]
6.
Press the button.
ð
The setting is saved, and the screen switches to the configuration overview
.
7.
Pressing the button returns to the [Main menu].
8.
Pressing the button returns to the [Operating display].
Control / software
98Rev. 2-05.2018
To Next Page
Loading...
Need help?
General
