Ecolab EcoAdd

7.9.5 Unit
Fig. 50: Configuration: Unit
Factory setting: Litres
[Unit] - setting:
1.
[Main menu] :
Ä Chapter 7.6 ‘Main menu’ on page 66
2.
[Configuration menu] :
Ä Chapter 7.9 ‘Overview - Configuration’ on page 83
3. Scroll up to [Unit]
using the scrollbar along the right edge of the screen.
4. [Unit] - select.
ð
Screen change for setting: [Unit]
5. Select ‘Litres’ or ‘Gallons’ selection box.
ð
The required selection is marked.
6.
Press the button to return to the [Configuration menu].
7.
Pressing the button returns to the [Main menu].
8.
Pressing the button returns to the [Operating display].
Control / software
91 Rev. 2-05.2018