DANGER
• Carry out yourself only the service and
maintenance work you have the requisite
knowledge and experience of.
• All other maintenance work may only
be carried out by an authorised service
workshop.
• Make sure that every defect is rectified
immediately, according to the instructions.
• Follow the instructions exactly!
• All other work to rectify faults must be
performed by personnel in an authorised
service workshop!
WARNING
• Never clean the electronic system, plastic components, signs, or bearings with a
high-pressure jet cleaner. It could cause damage.
• Never expose the electronic system to high electrical voltages. This could
damage the control system.
• Never immerse the controller in water or other liquid. This will make the
controller unusable.
If your crane is equipped with add-on lifting equipment (hoist, rotator, etc.):
• The operation of the crane with add-on lifting equipment can differ from the
operation as described in this manual.
• You should therefore study the Operating Manual for the add-on equipment
carefully before you use the crane.
• Take particular note when placing the crane into or out of the transport position.
Introduction
EFFER 265-315-395-525 Progress 2.0 CE 11
To Next Page
Loading...
