CAUTION
• If you have multi-stage stabiliser
extensions, verify that the larger section
tube is completely out (marked by
a yellow reference) before extracting
a smaller section. If not, repeat the
extraction.
• If you retract the stabiliser extensions
to change the position of the stabiliser
legs, it may be necessary to retract
the stabiliser extensions completely to
keep the sequence, larger extensions
completely extended before the smaller
ones.
Stabiliser extensions status:
The percentages of the stabiliser extension extended are shown in the Display panel and on the
controllers.
User Interface with
LEDs
Display panel STEADY SCANRECO
5.2.4. Set the stabiliser legs
The procedure of setting the crane and the auxiliary [option] stabiliser system differs depending on
the type of stabiliser system. Repeat the instructions for the stabiliser leg(s) on the other side of the
vehicle.
Starting crane operation
88 EFFER 265-315-395-525 Progress 2.0 CE
To Next Page
Loading...
