Effer 265 - Displays

(1) Emergency stop
button.
(6) Speed selector
mode:
• Left: reduced speed
• Right: HSS
• Centre: standard
speed
(11) Lights ON/OFF, activation
of special features for some
models (i.e. 7th or 9th extension
with cylinder inside the extension,
etc...)
(2) On/Reset button. (7) Speed adjustment:
• 5 positions based on
preset values.
(12) Rpm increase.
(3) LED for battery
status and radio
connection:
• On: remote on and the
battery is charged.
• Flashing: the battery
must be replaced and
the transmission is
bad.
(8) Operation selector
mode:
• Left: CRANE mode
(CRANE)
• Right: STABILISER
SYSTEM mode
(STAB)
• Centre [option]:
(TRUCK WALLS)
(13) Rpm decrease.
(14) Rotatory selector:
• SCROLL function - navigate to
different options/pages.
• ENTER function - push it shortly
to confirm an option.
• ESC/EXIT function - push it for
maximum 2 seconds.
• Turn on the LEDs on the
controller - push it 5 seconds
(4) Selector for
additional equipment.
(9) Truck engine on.
(5) Selector for
additional equipment:
• Left: Hoist
• Right: additional
equipment
(10) Truck engine off.
Adjust the brightness of the screen:
1. With STEADY off, release the emergency stop button.
2. Push button (14) for 2 seconds.
3. Rotate button (14) to the desired brightness.
4. Push button (14) again to confirm.
5. Turn STEADY off.
Locking the controller:
Push the emergency button.
Unlocking the controller:
1. Release the emergency button.
2. Push and hold for at least two seconds the button (2) to activate the controller. The lights (3)
will turn on.
4.11.2. Displays
The display shows information about the operation of the crane, options selected, and errors.
The control system
EFFER 265-315-395-525 Progress 2.0 CE 57