• Standard stabiliser system
a - front
b - right side
c - rear
d - left side
6.1.16. SENSE [option]
Progress equipped with the SENSE feature detects the
position of the stabiliser extensions. This optimises the
crane lifting capacity in relation to the vehicle's stability.
The lifting capacity curve will be the most favourable if
all the stabilisers are fully extended. If this is not possible
due to the limited space available, the lifting capacity curve
will be reduced for the stability of the vehicle. SENSE
calculates and manages the performances on 360 different
areas: one for each degree of the crane slewing area.
The position of both, crane stabiliser extensions and auxiliary stabiliser extensions, are
detected proportionally by Progress to calculate the stability.
All positions detected:
• From 0% to 100%
NOTE
According to the real stability of the vehicle
and the load applied, the SENSE device
could limit progressively the lifting capacity
starting from 60º of the 2nd boom.
During operation
EFFER 265-315-395-525 Progress 2.0 CE 107
To Next Page
Loading...
