Effer 265 - Grease on the Stabiliser Extensions; Lubrication of the Hooks

NOTE
To prevent or correct malfunctions
or the “stick-slip” of the
boom extensions operation, we
recommend lubricating the lower
part of the extensions.
If you have any doubt, please
contact your Effer representative.
8.4.6. Grease on the stabiliser extensions
Grease the lower sliding surfaces on the stabiliser
extensions.
When accessible, grease inside the stabiliser beam in the
upper and lower sliding surfaces.
8.4.7. Lubrication of the hooks
Hooks with plane bearing
1. Lubricate with oil the spring of the latch.
2. If the hook cannot rotate easily without load, grease the
plane bearing surfaces.
Use a heavy duty penetrating spray grease, type "ZEP
2000" or equivalent quality.
Maintenance and Service
154 EFFER 265-315-395-525 Progress 2.0 CE