7.2. Operating the stabiliser system into the transport
position
DANGER
Do not stand in the stabiliser legs tilting area.
WARNING
• Do not put your foot on the support plate.
• Risk of crushing injuries.
• Always keep hands away from moving
parts during operation.
WARNING
Do not operate any stabiliser leg up if you still have load on the crane.
The procedure of operating the crane and auxiliary [option] stabiliser legs differs depending on the
type of stabiliser leg. Repeat the instructions for the stabiliser extension and leg on the other side of
the vehicle.
DANGER
Always ensure that the stabiliser legs and the stabiliser extensions are in transport
position and securely locked before moving the vehicle.
• Remote controlled stabiliser system:
1. Lift up and move the selector (V) to 'STAB' mode on the controller.
2. Push the timed button that is on the same side.
Ending crane operation
EFFER 265-315-395-525 Progress 2.0 CE 125
To Next Page
Loading...
