Effer 265 - Indicator Leds on the User Interface

4.7.1. Indicator LEDs on the User Interface
NOTE
When you switch the control system on, an automatic LED test is done.
All the LEDs are illuminated to detect the presence of defective LEDs.
LEDs flashing slowly LEDs flashing fast
LEDs steady
Crane:
(P1), (P2), (P3)
90% of max. performance 100% of max. performance Overloaded
Hoist:
(V)
90% of max. performance 100% of max. performance -
LEDs flashing slowly LEDs flashing fast
LEDs steady
Stabiliser extensions:
(S1-a), (S2-a), (S3-a), (S4-a)
Extended below 50% Extended over 50% Extended 100%
Stabiliser legs:
(S1-b), (S2-b), (S3-b), (S4-b)
- - Set to the ground
The control system
50 EFFER 265-315-395-525 Progress 2.0 CE