10. Technical Data
10.1. Load plate table and stability diagrams
IMPORTANT
All these documents must be stored together with this Operator’s manual.
NOTE
The rest of the technical data are delivered with the crane.
Load plate table
The Installer must fill in the valid meters (m)/feets (ft) and kilos (kg)/pounds (lb) and percentage
(%) in a table, similar to the example picture below, following instructions given in the Installation
Manuals. The installer delivers it then to the operator.
Technical Data
EFFER 265-315-395-525 Progress 2.0 CE 163
To Next Page
Loading...
