NOTE
You might have different images on your screen depending on the configuration of
your crane.
NOTE
• Scroll the rotary selector on the controller to select the desired icon and to
navigate between the different displays (that you access after selecting an icon).
• Use the ENTER function to confirm the selection.
• Use the ESC/EXIT function to exit the selection.
Stabiliser displays
When you lift up and turn the selector (8) to STAB, the ‘STAB ALLOW’ or ‘STAB RECOVERY
ALLOW’ display is shown. After a few seconds, the display changes into the stabiliser status
displays according to the crane configuration.
Crane displays
When you lift up and turn the selector (8) to CRANE mode on the controller, the main display is
shown. It shows the crane configuration and the movements permitted with the respective arrows.
The control system
58 EFFER 265-315-395-525 Progress 2.0 CE
To Next Page
Loading...
