When changing from mineral oil to a non-polluting synthetic oil, or when changing to biodegradable
oil, contact an authorised service workshop.
Recommended hydraulic oils
ISO VG 32 ISO VG 46 ISO VG 68
Examples
Tellus S2 V32
Super 32
Hydrol L-HV 32
Shell TELLUS T 46
Texaco RANDO HDZ46
Agip ARNICA 46
Mobil SHC 526
Where to use them
Viscosity of oil
The viscosity of the oil is of great importance to achieve high efficiency of the hydraulic system.
The naming of the oil in the table below: 32, 46 or 68 tells the viscosity of that oil at 40°C (104°F)
(reference temperature).
Viscosity of oil at 40°C (104°F) Temperature range
32 -25°C to 75°C (-13°F to 167°F)
46 -15°C to 90°C (5°F to 194°F)
68 -5°C to 90°C (23°F to 194°F)
The recommended viscosity during normal working conditions is between 20 and 70 cSt.
Effer strongly recommends an oil working temperature below 80°C (176°F). If necessary consider
an extra oil cooler or heater.
NOTE
If you need to work at a temperature below -25°C (-13°F), contact an authorised
service workshop.
Maintenance and Service
EFFER 265-315-395-525 Progress 2.0 CE 157
To Next Page
Loading...
