Effer 265 - Page 86

a. Push and hold the related lever to activate the stabiliser function.
b. Pull the lever for the stabiliser extension/leg movement.
STEADY Scanreco
Stabiliser
extensions
Stabiliser
legs
Rotating
stabiliser
(CroSStab)
NOTE
With Progress system:
• You can operate the stabiliser system in all
directions only if the message 'STAB ALLOW'
is visible on the controller display.
• You can operate the stabiliser leg downwards
if the message 'STAB RECOVERY ALLOW' is
visible on the controller display.
• You cannot operate the stabiliser system if
the message 'STAB LOCK' is visible on the
controller display.
Starting crane operation
86 EFFER 265-315-395-525 Progress 2.0 CE