COMMAND
DEFINITION
CODE
COMMAND
VALUE
EXAMPLE
Set monitoring station
phone number (for
Voice calls and SMS)
26 ps ttteeellnnuumm # ps – phone number slot,
range – [01... 03]; ttteeel-
lnnuumm – up to 15 digits
monitoring station phone
number.
26010044170911XXXX1#
Set account (for Mon-
itoring Station)
Main Account: 27 cccc#
Server 2 Account: 96 12 cccc#
Server 3 Account: 96 13
cccc#
cccc – 4-digit account
number.
278853#
Enable/Disable ATZ mode 281/280 # 281/280 #
Enable/disable bell squawk 291# / 290# 291# / 290#
Disable/ Enable Call
in case of alarm
30 us 1 #
30 us 0 #
us - user phone number slot,
range - [01... 10].
30091#
30090#
Enable / Disable
Chime attribute
321# / 320# 321# / 320#
Enable/ Disable EPGM8 mode 33 1#
33 0#
331#
330#
Set Zone for Arm-Dis-
arm by Zone method
34 z nn # z – on-board zone slot for
Arm-Disarm by Zone method;
range - [1... 4]; nn – on-board
zone number,
range – [01... 16].
34023#
Disable Arm-Disarm
by Zone method
34 z 00 # z – on-board zone slot for
Arm-Disarm by Zone method;
range - [1... 4].
34200#
Disable/ Enable Event Log 360/ 361 # 360/ 361 #
Set attempts (for Voice
Calls and SMS)
37 at # at – number of attempts,
range – [01... 10].
3706#
Set server IP address Server 1: 40
add add add add #
Server 2: 96 02
add add add add #
Server 3: 96 03
add add add add #
add add add add – server IP
address.
40065082119005#
Set DNS1 server IP address 41 add add add add# add add add add – DNS1
server IP address.
41065082119001#
Set DNS2 server IP address 42 add add add add# add add add add – DNS2
server IP address.
42065082119002#
Set protocol Server 1: 430# -
TCP / 431# - UDP
Server 2: 96060# - TCP /
96061# - UDP
Server 3: 96070# - TCP /
96071# - UDP
431#
Set server port Server 1: 44 pprrt#
Server 2: 96 04 pprrt#
Server 3: 96 05 pprrt#
pprrt – server port number,
range – [1... 65535].
443365#
Set test period Server 1: 46 tteessttpp#
Server 2: 96 10 tteessttpp #
Server 3: 96 11 tteessttpp #
tteessttpp – test period,
range – [0... 65535] seconds.
46120#
To Next Page
Loading...
