Eldes ESIM384 - Page 82

82
82
EN
ESIM384 Installation and Conguration Manual v1.1
Disable wireless
communication failed
notication
EKB2
Menu path:
User phone number: OK → iiii → OK → SMS MESSAGES 2 → OK → WRLESS FAIL 20MIN. → OK
→ GSM USER 1... 10 → OK → DISABLE → OK
SMS text message to all users simultaneously: ... → WRLESS FAIL 20MIN. → OK → SMS TO ALL →
OK → DISABLE → OK
SMS delivery report: ... → WRLESS FAIL 20MIN. → OK → SMS REPORT → OK → DISABLE → OK
Value: iiii – 4-digit installer code.
EKB3/
EKB3W
Enter parameter 25/21/55, event number, user phone number slot and parameter
status value:
User phone number: 25 25 up 0 #
SMS text message to all users simultaneously: 21 25 0 #
SMS delivery report: 55 25 0 #
Value: up - user phone number slot, range - [01... 10].
Example: 252530#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.
ATTENTION: Once a certain tamper is disabled, the system will NOT deliver any SMS text message regarding the physical tamper violation
nor wireless signal loss or restore. For more details on how to manage the tampers, please refer to 16. TAMPERS.
ATTENTION: The system will NOT deliver any text message regarding wireless signal loss or restore while the physical tamper violation is in
progress.