Electrolux E23CS75DSS0 - Removing the Doors

9
Section A - Installation
Removing the Doors
Ifyourrefrigeratorwillnottthroughanentrancearea,youcanreduceitssizebyremovingthedoors.
Checkrstbymeasuringtheentrance.
Required Tools
Youwillneedthefollowingtools:
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR
To prepare for removing the doors:
1 Makesuretheelectricalpowercordis
unpluggedfromthewalloutlet.
2 Openbothdoorsandremovethetoegrille
(asexplainedintheInstallationInstructions
thatcamewithyourappliance).
3 Removeanyfoodfromthedoorshelves.
4 Closethedoors.
To remove the refrigerator top hinge
cover:
1 Removethethreescrewsfromeachcover
overthetopdoorhinges.
2 Lifthingecoverstraightupandoff.
To remove the refrigerator door:
1 Tracelightlyaroundthedoor’stophingewith
apencil.Thismakesreinstallationeasier.
2 Removethetwoscrewsfromthetophinge.
Liftthedooroffofthebottomhingeandsetit
aside.
Adjustable Hinge (some models)