139
CHAPTER 2: Instructor / Operator’s Station (IOS)
NOTE: Ensure that the appropriate NAV database (region)
is load ed for fl ying the IAS.
When you select OPEN, you will hear a
suc ces sion of beeps followed by information and
op tion dialog box es. Make your se lec tions and
fol low on-screen in struc tions.
After the last selections are made, you are ready to fl y the
approach. Return to the Instrument screen and re lease
the FREEZE button.
NOTE: When you release the FREEZE button, the au to pi lot
will engage and stabilize the air craft. When the heading
and altitude have stabilized, you can continue to use the
au to pi lot or dis en gage it to man u al ly fl y the approach.
NOTE: If you miss an ATC in struc tion, you can have
it repeated by pressing CTRL R (R for repeat) on the
keyboard.
If you elect to have the copilot change frequencies, it’s
always a good idea to verify them anyway. Some co pi lots
are bet ter than others!
Loading and Playing Scenario Flight Paths:
Click on the 1. PATH button on the MAP page
and choose LOAD.
Choose the IAS path that you would like to 2.
see.
Click on 3. REPLAY to review the fl ight path.
Use the PROFILE and EXTENDED buttons
on the MAP page as desired to display all
associated air craft data.
To Next Page
Loading...
