PI-135 OPERATOR’S MANUAL
130
FAILURE STATES
Similar to saving and loading METEO States, the SAVE
and LOAD but tons next to “Failure State” enable you to
Save and Load Failure States.
You can literally de vel op a library of these states that can
be instantly re called for use anytime. Create a failure
scenario (state) and tweak it until you are satisfi ed, then
click the SAVE button to open the Save Malfunction fi les
dialog box. Type a unique name in the “File name:” box
such as “OilPressLoss” then click Save to complete the
op er a tion. To load this failure state (or any other) in the
fu ture, just click on the LOAD button to open the Open
Malfunction fi les dialog box. Se lect a failure state from
those listed (previously saved) and click Open.
To Next Page
Loading...
Need help?
General
