ELITE OPERATOR’S MANUAL
272
Cockpit Functions
Press-to-test
TB20 Landing Gear
The small knob labeled TEST below the right green light is
a press-to-test switch which, when pressed, will illuminate
all the lights including the red, ‘in transit’ light. The red light
will also illuminate if the throttle is closed with the gear in
the up position.
TB20 Rudder Trim
The rudder trim knob is only functional when used in
conjunction with rudder pedals or if the Yaw Control feature
is ‘Enabled’ on the CONTROL Page. If the Yaw Control
is ‘Disabled’ the ELITE software locks out the rudder trim
and the aircraft maintains coordinated fl ight.
To Next Page
Loading...
