319
CHAPTER 5: AIRCRAFT
The amp meter shows charge or
discharge information. Check
gen er a tor load by pressing left or
right engine AMP button.
The chronometer in the Seneca III gives 3 specifi c
displays: UTC time, OAT (Fahrenheit and Celsius) and
timer. The chronometer digital display shows Time and
OAT information as provided on the Control page (time)
and Meteo page (OAT).
CONTROL Page
METEO Page
SEL button toggles be tween UTC, OAT
and timer modes. When in the OAT
mode, Fahr to Cen can be changed by
pressing the CTL button. In the timer
mode, pressing CTL will start or stop
timer. Holding CTL for ap prox i mate ly 2
sec onds will reset the timer to zero.
To Next Page
Loading...
