177
Servo Commands
Servo Commands
October 2018
Reference Manual
00809-0100-2460, Rev DE
When a servo command is sent, the Level /Displacer position field in the Servo Command window turns
orange and the servo state is displayed to the left of the Level /Displacer position value as an abbreviation:
3. Before you close the Servo Command window, verify that the servo command indicator next to Level
/Displacer pos. field is cleared, e.g. the T for Test is not visible.
4. Click Close.
Servo Command Abbreviation
Freeze (Block) F
Park (Lock/Stow) P
Test T
Search for water level D
Water level found W
Density scan active R
To Next Page
Loading...
