51
Reference Manual
00809-0100-2460, Rev DE
Configuration
October 2018
Configuration
e. (Redundancy). Perform a redundancy configuration in case the system has a pair of redundant
system hubs. This is included as part of the installation wizard. See “Redundancy configuration”
on page 76 for more information.
8. In case the Rosemount 2460 communicates with a host system via the Ethernet 1 port and Modbus
TCP protocol, open the Web based Graphical User Interface for configuration as described in
Section 6: Service and Troubleshooting.
See the Rosemount Tank Gauging System Configuration Manual
(Document no. 00809-0300-5100) for
more information on using the TankMaster WinSetup software to configure a Rosemount Tank Gauging
system with Rosemount 2460 System Hubs.
To Next Page
Loading...
