Endress+Hauser HART Proline t-mass I 300 - Page 112

Commissioning Proline t-mass I 300 HART
112 Endress+Hauser
Using the parameter to define the access code
Navigation
"Setup" menu → Advanced setup → Administration → Define access code
‣
Define access code
Define access code
→  112
Confirm access code
→  112
Parameter overview with brief description
Parameter Description User entry
Define access code Restrict write-access to parameters to protect the configuration
of the device against unintentional changes.
Max. 16-digit character string comprising
numbers, letters and special characters
Confirm access code Confirm the entered access code. Max. 16-digit character string comprising
numbers, letters and special characters
Using the parameter to reset the access code
Navigation
"Setup" menu → Advanced setup → Administration → Reset access code
‣
Reset access code
Operating time
→  112
Reset access code
→  112
Parameter overview with brief description
Parameter Description User interface / User entry
Operating time Indicates how long the device has been in operation. Days (d), hours (h), minutes (m) and seconds
(s)
Reset access code Reset access code to factory settings.

For a reset code, contact your Endress+Hauser service
organization.
The reset code can only be entered via:
• Web browser
• DeviceCare, FieldCare (via service interface CDI-RJ45)
• Fieldbus
Character string comprising numbers, letters
and special characters
Using the parameter to reset the device
Navigation
"Setup" menu → Advanced setup → Administration