Endress+Hauser HART Proline t-mass I 300 - Page 184

Technical data Proline t-mass I 300 HART
184 Endress+Hauser
Flat ring seal
• EPDM
• FKM
For aggressive media (e.g. chlorine or ozone), we recommend special materials (Alloy
for sensing element, PVDF or 1.4404 for ferrules and FKM for flat seal). For any
requests, please contact the Endress+Hauser sales organization responsible for your
area.
Sensor guard
Stainless steel, 1.4404 (316/316L)
Accessories
Protective cover
Stainless steel, 1.4404 (316L)
External WLAN antenna
• Antenna: ASA plastic (acrylic ester-styrene-acrylonitrile) and nickel-plated brass
• Adapter: Stainless steel and nickel-plated brass
• Cable: Polyethylene
• Plug: Nickel-plated brass
• Angle bracket: Stainless steel
Mounting boss (DK6MB)
Stainless steel, 1.4404 (316/316L)
Hot tap, low and medium pressure
Mounting boss
Stainless cast steel 1.4404 (316L)
Ball valve
• Stainless cast steel CF3M or CF8M
• Seal: PTFE
Sensor connection
Stainless steel, 1.4404 (316/316L)
Cold tap, atmospheric pressure
• Stainless steel, 1.4404 (316/316L)
• Stainless cast steel CF3M or CF8M
• Seal: PTFE
Process connections • G¾", ISO 228/1 compression fitting
• G1", ISO 228/1, compression fitting
• ¾" NPT, compression fitting
• 1" NPT, compression fitting
For information on the different materials used in the process connections →  183