Endress+Hauser HART Proline t-mass I 300 - Page 75

Proline t-mass I 300 HART System integration
Endress+Hauser 75
Parameter Description Selection / User entry
Burst variable 2 For HART command 9 and 33: select the HART device variable
or the process variable.
See the Burst variable 0 parameter.
Burst variable 3 For HART command 9 and 33: select the HART device variable
or the process variable.
See the Burst variable 0 parameter.
Burst variable 4 For HART command 9: select the HART device variable or the
process variable.
See the Burst variable 0 parameter.
Burst variable 5 For HART command 9: select the HART device variable or the
process variable.
See the Burst variable 0 parameter.
Burst variable 6 For HART command 9: select the HART device variable or the
process variable.
See the Burst variable 0 parameter.
Burst variable 7 For HART command 9: select the HART device variable or the
process variable.
See the Burst variable 0 parameter.
Burst trigger mode Select the event that triggers burst message X. • Continuous
• Window
*
• Rising
*
• Falling
*
• On change
Burst trigger level Enter the burst trigger value.
Together with the option selected in the Burst trigger mode
parameter the burst trigger value determines the time of burst
message X.
Signed floating-point number
Min. update period Enter the minimum time span between two burst commands of
burst message X.
Positive integer
Max. update period Enter the maximum time span between two burst commands of
burst message X.
Positive integer
* Visibility depends on order options or device settings