Endress+Hauser Levelflex FMP55 - Full Calibration; Level

Levelflex FMP55 HART Operating menu
Endress+Hauser 131
Full calibration 
Navigation  Setup → Full calibration
Description Distance between minimum level (0%) and maximum level (100%).
User entry Depending on the probe
Factory setting Depending on the probe
Additional information
0%
F
F
0%
100%
100%
A0013188
 45 Full calibration (F) for interface measurements
In the case of interface measurements the Full calibration parameter is valid for
both, the total and the interface level.
Level
Navigation  Setup → Level
Description Displays measured level L
L
(before linearization).