Endress+Hauser Levelflex FMP55 - Connecting; Opening Connection Compartment Cover

Levelflex FMP55 HART Electrical connection
Endress+Hauser 49
7.2.1 Opening connection compartment cover
2.
1.
3 mm
A0021490
1. Loosen the screw of the securing clamp of the connection compartment cover using
an Allen key (3 mm) and turn the clamp 90 ° clockwise.
2. Afterwards unscrew connection compartment cover and check lid gasket, replace if
necessary.
7.2.2 Connecting
10 (0.4)
10 (0.4)
2.
3.
3.
1.
A0036418
 21 Dimensions: mm (in)
1. Push the cable through the cable entry . To ensure tight sealing, do not remove the
sealing ring from the cable entry.
2. Remove the cable sheath.
3. Strip the cable ends over a length of 10 mm (0.4 in). In the case of stranded cables,
also fit ferrules.
4. Firmly tighten the cable glands.