Endress+Hauser Levelflex FMP55 - Display Channel 1 to

Levelflex FMP55 HART Operating menu
Endress+Hauser 201
"Display channel 1 to 4" submenu
The Display channel 1 to 4 submenus are only available for operation via the local
display. When operating via FieldCare, the logging diagram can be displayed in the
FieldCare function "Event List / HistoROM" .
The Display channel 1 to 4 submenus invoke a diagram of the logging history of the
respective channel.
• x-axis: depending on the number of selected channels, 250 to 1000 measured values of
a process variable are displayed.
• y-axis: covers the approximate measured value span and constantly adapts this to the
measurement.
To return to the operating menu, press  and  simultaneaously.
Navigation  Diagnostics → Data logging → Display channel 1 to 4