Levelflex FMP55 HART Operating menu
Endress+Hauser 193
17.5.3 "Device information" submenu
Navigation Diagnostics → Device information
Device tag
Navigation Diagnostics → Device information → Device tag
Description Enter the name for the measuring point.
Factory setting FMP5x
Serial number
Navigation Diagnostics → Device information → Serial number
Description Shows the serial number of the measuring device.
Additional information Uses of the serial number
• To identify the device quickly, e.g. when contacting Endress+Hauser.
• To obtain specific information on the device using the Device Viewer:
www.endress.com/deviceviewer
The serial number is also indicated on the nameplate.
Firmware version
Navigation Diagnostics → Device information → Firmware version
Description Shows the device firmware version installed.
User interface xx.yy.zz
Additional information For firmware versions differing only in the last two digits ("zz") there is no difference
concerning functionality or operation.
Device name
Navigation Diagnostics → Device information → Device name
Description Shows the name of the transmitter.
To Next Page
Loading...
