Endress+Hauser Levelflex FMP55 - Decimal Places Menu; Header Text; Number Format; Separator

Levelflex FMP55 HART Operating menu
Endress+Hauser 181
Header text 
Navigation  Setup → Advanced setup → Display → Header text
Prerequisite Header (→  180) = Free text
Description Enter display header text.
Factory setting ------------
Additional information The number of characters which can be displayed depends on the characters used.
Separator 
Navigation  Setup → Advanced setup → Display → Separator
Description Select decimal separator for displaying numerical values.
Selection • .
• ,
Factory setting .
Number format 
Navigation  Setup → Advanced setup → Display → Number format
Description Choose number format for the display.
Selection • Decimal
• ft-in-1/16''
Factory setting Decimal
Additional information The ft-in-1/16'' option is only valid for distance units.
Decimal places menu 
Navigation  Setup → Advanced setup → Display → Decimal places menu
Description Select number of decimal places for the representation of numbers within the operating
menu.