Endress+Hauser Levelflex FMP55 - Distance

Operating menu Levelflex FMP55 HART
132 Endress+Hauser
Additional information
0%
L
0%
L
L
L
A0013195
 46 Level in case of interface measurements
• The unit is defined in the Level unit parameter (→  143).
• In case of interface measurements, this parameter always refers to the total level.
Distance
Navigation  Setup → Distance
Description Displays the measured distance D
L
between the reference point (lower edge of the flange
or threaded connection) and the level.
Additional information
D
L
D
L
A0013199
 47 Distance for interface measurements
The unit is defined in the Distance unit parameter (→  128).