Endress+Hauser Levelflex FMP55 - Thickness Upper Layer

Levelflex FMP55 HART Operating menu
Endress+Hauser 197
Description Displays the measured distance D
I
between the reference point (lower edge of flange or
threaded connection) and the interface.
Additional information
D
I
D
I
A0013202
The unit is defined in the Distance unit parameter (→  128).
Interface linearized
Navigation  Diagnostics → Measured values → Interface linearized
Prerequisite Operating mode (→  128) = Interface or Interface with capacitance
Description Displays the linearized interface height.
Additional information The unit is defined in the Unit after linearization parameter →  152.
Thickness upper layer
Navigation  Diagnostics → Measured values → Thickness upper layer
Prerequisite Operating mode (→  128) = Interface or Interface with capacitance
Description Displays the upper interface thickness (UP).