Endress+Hauser Levelflex FMP55 - Page 198

Operating menu Levelflex FMP55 HART
198 Endress+Hauser
Additional information
UP
UP
A0013313
UP Thickness upper layer
The unit is defined by the Unit after linearization parameter →  152.
Output current 1 to 2
Navigation  Diagnostics → Measured values → Output current 1 to 2
Description Shows the actual calculated value of the output current.
Measured current 1
Navigation  Diagnostics → Measured values → Measured current 1
Prerequisite Only available for current output 1
Description Shows the current value of the current output which is currently measured.
Terminal voltage 1
Navigation  Diagnostics → Measured values → Terminal voltage 1
Description Shows the current terminal voltage that is applied at the output.