Endress+Hauser Levelflex FMP55 - Measured Values Submenu; Measured Values

Operating menu Levelflex FMP55 HART
196 Endress+Hauser
17.5.4 "Measured values" submenu
Navigation  Diagnostics → Measured values
Distance
Navigation  Diagnostics → Measured values → Distance
Description Displays the measured distance D
L
between the reference point (lower edge of the flange
or threaded connection) and the level.
Additional information
D
L
D
L
A0013199
 56 Distance for interface measurements
The unit is defined in the Distance unit parameter (→  128).
Level linearized
Navigation  Diagnostics → Measured values → Level linearized
Description Displays linearized level.
Additional information • The unit is defined by the Unit after linearization parameter →  152.
• For interface measurements, this parameter always refers to the total level.
Interface distance
Navigation  Diagnostics → Measured values → Interface distance
Prerequisite Operating mode (→  128) = Interface or Interface with capacitance