Endress+Hauser Levelflex FMP55 - Notes on the Mechanical Load of the Probe

Mounting Levelflex FMP55 HART
24 Endress+Hauser
6.1.3 Notes on the mechanical load of the probe
Tensile load limit of rope probes
Sensor Feature 060 Probe Tensile load limit [kN]
FMP55 NA, ND Rope 4mm (1/6") PFA>316 2
Bending strength of rod probes
Sensor Feature 060 Probe Bending strength [Nm]
FMP55 CA, CB Rod 16mm (0.63") PFA>316L 30
Bending strength of coax probes
Sensor Feature 060 Process connection Probe Bending strength [Nm]
FMP55 UA, UB Flange Coax 316L, Ø 42,4 mm 300