Maintenance Levelflex FMP55 HART
98 Endress+Hauser
14 Maintenance
The measuring device requires no special maintenance.
14.1 Exterior cleaning
When exterior-cleaning the device, always use cleaning agents that do not attack the
surface of the hosuing and the seals.
14.2 Cleaning coax probes
For cleaning purposes the ground tube can be stripped of the coaxial probe. When
unmounting and remounting the tube, make sure that the PFA spacers do not get out of
space. A first spacer is positioned at about 10 cm (4 in) from the end of the probe.
Depending of the length of the probe there may be additional spacers evenly spaced along
the probe.
To Next Page
Loading...
