Endress+Hauser Levelflex FMP55 - Page 64

Operation options Levelflex FMP55 HART
64 Endress+Hauser
Display symbols for the submenus
Symbol Meaning
A0018367
Display/operation
Is displayed:
• in the main menu next to the selection "Display/operation"
• in the header, if you are in the "Display/operation" menu
A0018364
Setup
Is displayed:
• in the main menu next to the selection "Setup"
• in the header, if you are in the "Setup" menu
A0018365
Expert
Is displayed:
• in the main menu next to the selection "Expert"
• in the header, if you are in the "Expert" menu
A0018366
Diagnostics
Is displayed:
• in the main menu next to the selection "Diagnostics"
• in the header, if you are in the "Diagnostics" menu
Status signals
A0032902
"Failure"
A device error is present. The measured value is no longer valid.
A0032903
"Function check"
The device is in service mode (e.g. during a simulation).
S
A0032904
"Out of specification"
The device is operated:
• Outside of its technical specifications (e.g. during startup or a cleaning)
• Outside of the configuration carried out by the user (e.g. level outside configured
span)
A0032905
"Maintenance required"
Maintenance is required. The measured value is still valid.
Display symbols for the locking state
Symbol Meaning
A0013148
Display parameter
Marks display-only parameters which can not be edited.
A0013150
Device locked
• In front of a parameter name: The device is locked via software and/or hardware.
• In the header of the measured value screen: The device is locked via hardware.