Endress+Hauser Proline Promag H 100 EtherNet/IP - Configuringйtheйlocalйdisplay

Commissioning ProlineйPromagйHй100йEtherNet/IP
50 Endress+Hauser
Parameter Description Selection Factory setting
Conductivityйunit Selectйconductivityйunit.
Result
Theйselectedйunitйappliesйfor:
Simulationйprocessйvariable
Unitйchooseйlist µS/cm
Temperatureйunit Selectйtemperatureйunit.
Result
Theйselectedйunitйappliesйfor:
• Output
• Referenceйtemperature
• Simulationйprocessйvariable
Unitйchooseйlist Country-specific:
• °CйсCelsius)
• °FйсFahrenheit)
Massйflowйunit Selectйmassйflowйunit.
Result
Theйselectedйunitйappliesйfor:
• Output
• Lowйflowйcutйoff
• Simulationйprocessйvariable
Unitйchooseйlist Country-specific:
• kg/h
• lb/min
Massйunit Selectйmassйunit.
Result
Theйselectedйunitйisйtakenйfrom:йMass flow
unitйparameter
Unitйchooseйlist Country-specific:
• kg
• lb
Densityйunit Selectйdensityйunit.
Result
Theйselectedйunitйappliesйfor:
• Output
• Simulationйprocessйvariable
• DensityйadjustmentйсinйExpertйmenu)
Unitйchooseйlist Country-specific:
• kg/l
• lb/ft³
Correctedйvolumeйflowйunit Selectйcorrectedйvolumeйflowйunit.
Result
Theйselectedйunitйappliesйfor:
• Output
• Lowйflowйcutйoff
• Simulationйprocessйvariable
Unitйchooseйlist Country-specific:
• Nl/h
• Sft³/h
Correctedйvolumeйunit Selectйcorrectedйvolumeйunit.
Result
Theйselectedйunitйisйtakenйfrom:йCorrected
volume flow unitйparameter
Unitйchooseйlist Country-specific:
• Nl
• Sft³
10.3.3 Configuring the local display
TheйDisplayйwizardйguidesйyouйsystematicallyйthroughйallйtheйparametersйthatйcan
configuredйforйconfiguringйtheйlocalйdisplay.
Navigation
"Setup"йmenuййDisplay