Endress+Hauser Proline Promag H 100 EtherNet/IP - Callingйupйremedyйinformation; Diagnosticйinformationйinйfieldcare; Diagnosticйoptions

Diagnosticsйandйtroubleshooting ProlineйPromagйHй100йEtherNet/IP
70 Endress+Hauser
Diagnostic information
Theйfaultйcanйbeйidentifiedйusingйtheйdiagnosticйinformation.йTheйshortйtextйhelpsйyouйby
providingйinformationйaboutйtheйfault.
Diagnosticйinformation
Diagnosticйcode
Statusйsignal Diagnosticйnumber Shortйtext
  
Example
ййA0013958
842 Process limit
3-digitйnumber
12.3.2 Calling up remedy information
Remedyйinformationйisйprovidedйforйeveryйdiagnosticйeventйtoйensureйthatйproblemsйcanйbe
rectifiedйquickly.йTheseйmeasuresйareйdisplayedйinйredйalongйwithйtheйdiagnosticйeventйand
theйrelatedйdiagnosticйinformation.
12.4 Diagnostic information in FieldCare
12.4.1 Diagnostic options
Anyйfaultsйdetectedйbyйtheйmeasuringйdeviceйareйdisplayedйonйtheйhomeйpageйofйthe
operatingйtoolйonceйtheйconnectionйhasйbeenйestablished.
Xxxxxx/…/…/
Xxxxxx
P
P
P
+
+
+
+
Diagnostics 1:
Remedy information:
Failure (F)
Function check (C)
Out of spezification (S)
Maintenance required (M)
C485 Simulation measured vari...
Deactivate Simulation (Service...
Diagnostics 1: C485 Simu...
Remedy information: Deactivate...
Access status tooling: Mainenance
Operation
Setup
Diagnostics
Expert
Function check (C)Status signal:
Device tag:
Device name:
Mass flow:
Volume flow:
Xxxxxxx
12.34
kg/h
12.34
m /h³
Xxxxxxx
1
2
3
ййA0021799-EN
1 Status area with status signal
2 Diagnostic information (→  70)
3 Remedial measures with Service ID