Endress+Hauser Proline Promag H 100 EtherNet/IP User Manual

Operationйoptions ProlineйPromagйHй100йEtherNet/IP
44 Endress+Hauser
8.4.2 FieldCare
Function scope
FDT-basedйplantйassetйmanagementйtoolйfromйEndress+Hauser.йItйcanйconfigureйallйsmart
fieldйdevicesйinйaйsystemйandйhelpsйyouйmanageйthem.йByйusingйtheйstatusйinformation,йitйis
alsoйaйsimpleйbutйeffectiveйwayйofйcheckingйtheirйstatusйandйcondition.
Accessйtakesйplaceйvia:
ServiceйinterfaceйCDI-RJ45йсййй43)
Typicalйfunctions:
• Configuringйparametersйofйtransmitters
• Loadingйandйsavingйdeviceйdataйсupload/download)
• Documentationйofйtheйmeasuringйpoint
• Visualizationйofйtheйmeasuredйvalueйmemoryйсlineйrecorder)йandйeventйlogbook
Forйdetails,йseeйOperatingйInstructionsйBA00027SйandйBA00059S
Source for device description files
Seeйdataйсййй46)
Establishing a connection
ViaйserviceйinterfaceйсCDI-RJ45)
1. StartйFieldCareйandйlaunchйtheйproject.
2. Inйtheйnetwork:йAddйaйdevice.
 TheйAdd deviceйwindowйopens.
3. SelectйtheйCDI Communication TCP/IPйoptionйfromйtheйlistйandйpressйOKйtoйconfirm.
4. Right-clickйCDI Communication TCP/IPйandйselectйtheйAdd deviceйoptionйinйthe
contextйmenuйthatйopens.
5. SelectйtheйdesiredйdeviceйfromйtheйlistйandйpressйOKйtoйconfirm.
 TheйCDI Communication TCP/IP (Configuration)йwindowйopens.
6. EnterйtheйdeviceйaddressйinйtheйIP addressйfieldйandйpressйEnterйtoйconfirm:
192.168.1.212йсfactoryйsetting);йifйtheйIPйaddressйisйnotйknownйсййй63).
7. Establishйtheйonlineйconnectionйtoйtheйdevice.
Forйdetails,йseeйOperatingйInstructionsйBA00027SйandйBA00059S

Endress+Hauser Proline Promag H 100 EtherNet/IP Specifications

General

Brand	Endress+Hauser
Model	Proline Promag H 100 EtherNet/IP
Category	Measuring Instruments
Language	English