Endress+Hauser Proline Promag H 100 EtherNet/IP - Pinйassignment,Йdeviceйplug; Preparingйtheйmeasuringйdevice; Connectingйtheйmeasuringйdevice; Connectingйtheйtransmitter

ProlineйPromagйHй100йEtherNet/IP Electricalйconnection
Endress+Hauser 29
7.1.4 Pin assignment, device plug
EtherNet/IP
Device plug for supply voltage (device side)
1
2
4
3
5
ййA0016809
Pin Assignment Coding Plug/socket
1 L+ DCй24йV A Plug
2
3
4 L- DCй24йV
5 Grounding/shielding
Device plug for signal transmission (device side)
3
2
4
1
ййA0016812
Pin Assignment Coding Plug/socket
1 + Tx D Socket
2 + Rx
3 - Tx
4 - Rx
7.1.5 Preparing the measuring device
1. Removeйdummyйplugйifйpresent.
2. NOTICE! InsufficientйsealingйofйtheйhousingкйOperationalйreliabilityйofйtheйmeasuring
deviceйcouldйbeйcompromised.йUseйsuitableйcableйglandsйcorrespondingйtoйtheйdegree
ofйprotection.
Ifйmeasuringйdeviceйisйdeliveredйwithoutйcableйglands:
Provideйsuitableйcableйglandйforйcorrespondingйconnectingйcableйсййй27).
3. Ifйmeasuringйdeviceйisйdeliveredйwithйcableйglands:
Observeйcableйspecificationйсййй27).
7.2 Connecting the measuring device
NOTICE
Limitation of electrical safety due to incorrect connection!
‣
Haveйelectricalйconnectionйworkйcarriedйoutйbyйcorrespondinglyйtrainedйspecialistsйonly.
‣
Observeйapplicableйfederal/nationalйinstallationйcodesйandйregulations.
‣
Complyйwithйlocalйworkplaceйsafetyйregulations.
‣
Forйuseйinйpotentiallyйexplosiveйatmospheres,йobserveйtheйinformationйinйtheйdevice-
specificйExйdocumentation.
7.2.1 Connecting the transmitter
Theйconnectionйofйtheйtransmitterйdependsйonйtheйfollowingйorderйcodes:
• Housingйversion:йcompactйorйultra-compact
• Connectionйversion:йdeviceйplugйorйterminals