Endress+Hauser Proline Promag H 100 EtherNet/IP - Performingйelectrodeйcleaning

ProlineйPromagйHй100йEtherNet/IP Commissioning
Endress+Hauser 59
Parameter Description Selection / User entry Factory setting
Displayйlanguage Setйdisplayйlanguage. • English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• уйяыйсRussian)
• Svenska
• Türkçe
• 中文йсChinese)
• 日本語йсJapanese)
• 한국어йсKorean)
• ةّيبَرَعْلاйсArabic)
• BahasaйIndonesia
• ภาษาไทยйсThai)
• tiếngйViệtйсVietnamese)
• češtinaйсCzech)
Englishйсalternatively,йthe
orderedйlanguageйisйpresetйin
theйdevice)
Displayйinterval Setйtimeйmeasuredйvaluesйareйshownйon
displayйifйdisplayйalternatesйbetweenйvalues.
1йtoй10йs 5йs
Displayйdamping Setйdisplayйreactionйtimeйtoйfluctuationsйin
theйmeasuredйvalue.
0.0йtoй999.9йs 0.0йs
Header Selectйheaderйcontentsйonйlocalйdisplay. • Deviceйtag
• Freeйtext
Deviceйtag
Headerйtext Enterйdisplayйheaderйtext. ------------
Separator Selectйdecimalйseparatorйforйdisplaying
numericalйvalues.
• .
• ,
.
Backlight Switchйtheйlocalйdisplayйbacklightйonйandйoff. • Disable
• Enable
Enable
10.4.4 Performing electrode cleaning
TheйElectrode cleaning circuitйsubmenuйcontainsйparametersйthatйmustйbeйconfiguredйfor
theйconfigurationйofйelectrodeйcleaning.
Theйsubmenuйisйonlyйavailableйifйtheйdeviceйwasйorderedйwithйelectrodeйcleaning.
Navigation
"Setup"йmenuййAdvancedйsetupййElectrodeйcleaningйcircuit
Structure of the submenu
Electrode cleaning circuit

Electrodeйcleaningйcircuit
ECCйduration
ECCйrecoveryйtime
ECCйcleaningйcycle
ECCйPolarity